Showing 1–16 of 26 results
-
Consumption and flow sensors.
Ethernet connection cable 5m length, M12 connector x-coded to RJ45. -
M12 connector is A-coded -
-
Replacement of the serial interface by two analog/digital outputs*.
1x digital output parameterizable as pulse or alarm contact for consumption/limit value monitoring.
1x analog output 0/4...20 mA for instantaneous measured values;
incl. M12 connector -
Measuring range: 0 ...16 bar (absolute)
Accuracy: 1% of measured value
Note: Measured values are transmitted via the serial interface.
No measured value indication on the display. -
Consumption and flow sensors -
Connection cable 5m length, M12 plug A-coded for two-wire bus (Modbus RTU) -
Connection cable 10m length, M12 connector A-coded for two-wire bus (Modbus RTU) -
Consumption and flow sensors.
Ethernet connection cable 10 m length, M12 connector x-coded on RJ45 -
Type: flexible, foldable whip antenna
Signal gain: +3dBi
Compatible: with LoRaWAN pulse counter outdoor sensor -
Voltage: 3.0 Volt
Capacity: 2000 mAh
Cell size: CR AA
Dimensions height: 50,5 mm
Diameter: 14.5 mm
Weight: 19 gram -
Voltage: 3,6 Volt
Capacity: 2200 mAh
Lifetime: up to 10 years
Cell size: AA (Mignon)
Technology: LiSOCl2
Cell type: Industrial -
for archiving periodic measurement data and
events in multifunction device AM1000 -
for archiving periodic measurement data and
events in multifunction device AM2000 -
for archiving periodic measurement data and
events in multifunction device AM3000 -
dual, bipolar +-20 mA for signal output
integrated in power quality analyzer PQ1000/3000/5000
or multifunctional unit AM1000/AM2000/AM3000